Market: Industry
To receive a quotation, please download this document and send it back either to sales@ctplaton.com or by fax at 33 1 39 35 44 01
Variable area flowmeter type NG-LG
Glass tube and float flowmeter
Flowmeters fom the NG – LG series are variable area flowmeters with easy to read scales, made of interchangeable components accomodating a large range of liquid or gas flows. Standard tubes are made of borosilicated glass and scales are calibrated over a 100 mm scale for the NG series and 30 mm for the LG series.
Flow alarm GIR for variable area flowmeter type NG-LG
Flow alarm for glass tube flowmeter
Floscan GIR flow alarms use an infra-red beam across the glass tube of a variable flowmeter. Passage of the float between the sensor arms is detected and a logic within the electronics determines whether the float is above or below the sensor position. The sensor is 12 VDC powered with a transistor switch output to drive external logic circuits.
Plastic tube flowmeter type GRV
Plastic moulded flowmeter
Plastic moulded variable flowmeter with 50 mm scale and rear facing connections. Suitable for flush panel mounting, with or without flow conrol valve, for air or water ranges.
Magnetically coupled flowmeter type GMT
All metal flowmeter for harsh service conditions
Platon GMT serie metal tube flowmeters are magnetically couple variable area flowmeters for liquids or gases. Requiring no external power they are robustly constructed for heavy duty with flanged connections up to 4’’ or threaded up to 2’’. Within the tapered flow tube, fluid flow lifts the metering element which contains a magnet. The external pointer follows the magnetic field and indicates flow against a clear 150° scale. Standard units are calibrated for air or water but scales can be produced to suit other fluids and process conditions.
Magnetically coupled totalising flowmeter type GMTX
Vampire - GMT flowmeter electronic version with LCD screen
The GMTX - Vampire is an electronic version of the standard GMT metal tube flowmeter where the mechanical pointer and scale is replaced with an LCD to give local meter and digital display of flow rate and total flow. The totally solid state indicator is either loop or mains powered with a 4-20mA output. High and low alarms are shown on the liquid crystal display panel and can be signalled to the plant control system.
Insertion thermal mass flowmeter type 454 FT
Heavy duty insertion thermal mass flowmeter
The 454FT insertion thermal mass flowmeter raises the standard for mass flow measurement of air and industrial gases. The mass flow transmitters incorporated the rugged Kurz all welded thermal sensor having a miniature powerful ‘’in the head’’ microprocessor having a large back lighted LCD/keypad with easy to use set up and configuration menus. The mass flow tranmitter uses only two all welded RTD sensors to provide fast measurements of the velocity and process temperaure. The LCD/keypad can be rotated to provide a convenient orientation for all applications.
Micronics non intrusive ultrasonic flowmeter
Time of flight ultrasonic flowmeter
The Micronics flowmeters are portable clamp on ultrasonic time of flight flowmeters; they are known to be robust and user friendly, compact and lighweight, easy to start up and to service presenting a very cost effective flow measurement solution for many applications. They are compatible with numerous pipe materials and suitable for pipe sizes from 13mm to 5 m. These flowmeters are also availbale as permanent fitted units presenting the same advantages as the portable versions as no process interruption is needed hence reducing installation costs.
Torbar averaging pitot tube
Dp flow probe complete with integrated manifold
The Torbar flowmeter is a multiport self averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement. Since the introduction of PLATON Torbar in 1985, thousands have been installed into a wide variety of industries world wide. The success of the Torbar range has generated a very wide experience in Dp flow measurement and has made Torbar the first European manufacturer of averaging tubes.
Torbar Mass Tribar flow probe
Pressure and temperature compensated flow measurement
The Torbar Mass Tribar is an insertion flowmeter comprising an integral valve manifold, a Pt100 temperature element and a multivariable flow transmitter. The Mass Tribar measures pressure, temperature and differential pressure directly from the Torbar and computes the compensated mass flow within the multivariable transmitter by automatically compensating for fluctuations in temperature and pressure. The Mass Tribar is ideally suited for the flow measurement of liquids, gases and steam and the totally integrated concept provides several direct advantages.
Automatic flow controller type Flostat MN
The Platon Flostat type MN is an automatic flow controller usually coupled to a Platon flowmeter type NG. This combination is called an FIC set. The Flostat accurately maintains a selected flowrate, as initially adjusted according to the displayed flow on the NG meter. This flow in held constant regardless of line pressure changes providing flow control and accuracy.
Automatic flow controller type Flostat V
The Platon Flostat type V automatically controls liquid or gas flows using line static pressure. Once selected, the flow rate is maintained regardless of upstream or downstream pressure variations No external power is required. Using an internal orifice to measure flow, the differential pressure produced drives an integral control valve.
Level switch type 20
Side mounting single float level switch with one or two switching units. Suitable for pressures up to 60 bar, temperatures between –10°C to 135°C and fluids with minimum specific gravity of 0,6 kg/dm3. This float level swith has a set point accuracy of +/- 5%.
Level switch type 30
Top mounting single float level switch with one or two switching units. Suitable for pressures, temperatures up to 400°C and fluids with minimum specific gravity of 1 kg/dm3. This float levelswitch has a set point accuracy of +/- 5%.
Level switch type 40
Type 41A - 41B - 41C - 41E
Top mounting buoyancy level switch with one or two switching units. Suitable for pressures up to 50 bar, temperatures between –10°C to 135°C and fluids with minimum specific gravityof 0,6 kg/dm3. This float level swith has a set point accuracy of +/- 7mm.
Level switch type 60
Side mounted single float level switch with one or two switching units and non inspectable body. Suitable for pressures up to 50 bar, temperatures up to 400°C and fluids with minimum specific gravity of 0,55 kg/dm3. Various models are availble for diferent specific gravities.
Level switch type 4060
Side mounted single float level single switching unit. Suitable for pressures up o 50 bar, temperature up to 135°C and fluids with minimum specific gravity of 0,4 kg/dm3. This level switch has set point accuracy of +/- 7mm.
Hydrostatic level transmitter type Trident
Submersible level transmitter
The Trident hydrostatic level transmitters are temperature compensated transmitters suitable for liquid level/depth measurement such as oil tanks, bore hole, river and reservoir level. The unit is of welded construction and totally reliable making it suitable for even the most onerous of applications.