Laminar Element Fowmeters
Laminar M series
Laminar M series
M Series mass flow transmitters calibrated for air as standard but available for use on many types of gas. By measuring the differential pressure produced by flow through a laminar flow element, an inherently linear reading is converted using modern electronics to give a voltage output, and an integral liquid crystal display. With a ten-millisecond response time, these units out-perform most thermal type meters.
Laminar L series
Laminar L series
The L Series flow transmitters are primarily for use on water but are also suitable for other liquids depending upon viscosity and material compatibility.
Laminar V series
Laminar V series
V Series volumetric flow transmitters are calibrated for air as standard but available for use on many types of gas. By measuring the differential pressure produced by flow through a laminar flow element, an inherently linear reading is converted using modern electronics to give a voltage output, and an integral liquid crystal display. With a ten-millisecond response time, these units out-perform most thermal type meters.
Laminar LC series
Laminar LC series
The LC Series Flow Controller utilises a proportional valve coupled to a flow meter body creating a unique in-situ closed-loop flow controller system. Measurements are taken within the laminar region of the flow meter and the integral PID controller positions the valve according to the flow set points.
Laminar MC series
Laminar MC series
MC Series mass flow controllers utilise a proportional valve coupled with a Laminar flowmeter similar to the M Series. Calibrated for air as standard, but available for use on many types of gas. These closed loop devices accept a zero to five volt control input and provide an independent output, giving the actual flow rate.