Products

Differential pressure gauge series Magnehelic

Differential pressure gauge series Magnehelic

Differential pressure gauge series Magnehelic

The Magnehelic® gauge uses magnetic coupling from the movement of a silicon rubber diaphragm onto a helical pointer drive shaft.

 

More details:

This measurement is friction free, accurate at very low differential pressures, and resistant to shock and vibration. The standard aluminium housing can be flush panel mounted. Pressure connections are duplicated on rear and side of the unit. Plugs and tube barbs supplied.

Specification

Accuracy

2.00 %

Ranges

Pascals, mm or inch WG, pitot flow

Media

Air & non corrosive gases

Temperature

-7 to 60ºC

Pressure

15psig max

Connections

1/8" NPT female. Plugs and adaptors for 5mm ID tube supplied

Housing

Die cast aluminium

Diaphragm

Silicon rubber, overpressure protected

Zero Adjust Screw

Mounted in meter face

Panel Cut Out

115mm diameter

Weight

0.5kg

Available Models

Pressure Range

Code

0-1 Inches Water

M2001

0-2 Inches Water

M2002

0-4 Inches Water

M2004

0-5 Inches Water

M2005

0-10 Inches Water

M2010

0-15 Inches Water

M2015

0-20 Inches Water

M2020

0-50 Inches Water

M2050

0-50mm Water

M2000-50mm

0-100mm Water

M2000-100mm

0-250mm Water

M2000-250mm

0-50cm Water

M2000-50cm

0-60Pa

M2000-60Pa

0-100Pa

M2000-100Pa

0-125Pa

M2000-125Pa

0-250Pa

M2000-250Pa

0-500Pa

M2000-500Pa

0-750Pa

M2000-750Pa

0-1000Pa

M2000-1000Pa

0-1500Pa

M2000-1500Pa

0-2000Pa

M2000-2000Pa

0-5000Pa

M2000-5000Pa

-30 to 30 Pa (centre zero)

M2300-60Pa

-60 to 60 Pa (centre zero)

M2300-120Pa

-125 to 125 Pa (centre zero)

M2300-250Pa